new guy with a rappy

rappy'97 said:

I didnt think you had to split the cases with the HotRods kit.

Click to expand...

To change the crank you have to split cases the crank is in the very center of the motor

I thought I read on here that you dont have to split the cases with the HotRods Kit?

no you have to split them you just dont have to mod the cases

You dont have to clearance the case for hot rods kits, but anything that has to do the the crank your splitting cases.

yea, I'm realizing what dent the race fuel is gonna put in my pocket so I think Im going to stick with the 10.5. and as far intake and exhaust it's all stock but a k&n and HMF are in the future plans.. thinking about going down a tooth or 2 in the front because most of the riding i do, i barely get into 5th

also, if you guys didn't see in the pic I don't have any headlights.. anyone know where you can buy them for pretty cheap and if anyone is selling some on the board?

They was a couple guys here selling them, you might try ebay, even then your looking at 50 bucks to get a set. I broke part of mine in a rollerover, they work but I can't adjust it up or down so I am going to get some fiberglass resin and glue back in place.

ebay has a set of headlights for 90 plus shipping. if thats to much ask around someone might have a set for sale on here.

Look on RaptorForums...