Recent content by ag2560

I had a customer call me and say my quad won`t start. He drops it off and tells me it just stopped running and nothing else. I think I found the problem.

I`d be careful doing motocross with the widening kit. They`re not really made to take that abuse. I`ve seen quite a few of those on some of my customers quads that can barely handle trail riding without bending.

The 88 Stator and flywheel setup won`t work with a 97 harness. There`s an extra coil on the Stator and 2 trigger points on the flywheel. It`s going to be easier to just convert it completely to the later electrical system and flywheel. Then you`ll have an easier time getting parts lot`s of 97-01...

Where`s that at Piney? I`m in Jersey and would love to check it out.

Good luck trying to a find a Supertrapp beastly. It took me around a year to find a decent one and I still had to pay out the ass for it. I`ve turned the DG megaphone muffler into supertrapps for some of my customers. You can get a set of the 4 inch discs and an end cap and drill and tap the...

First off thank you for your service. Secondly start with checking the plug pull it out of the head and hook the wire back up. Ground it on the motor and see if you have any spark. If not check the connectors on the harness to see if anything came loose. A lot of times it`s the Stator that...

They`re aftermarket plastics from Maier. I really wanted orange ones like on my last Warrior but they don`t make them anymore.

I finally finished my Warrior just trying to decide on the graphics.

I ride a bunch of places in PA. If I`m doing a weekend thing I`ll go to SSRT and some of the state trails close to there. Iv`e been to Rock Run a few times. If I`m doing a day trip I`ll go to AOAA or Lost Trails.

Where are you riding in NJ? I`m from Central Jersey all the places I used to go down south are pretty much off limits now. I head out to PA or upstate NY to get my riding fix.

The only key that works for the 87 is the oem 87 switch.

Get a new key switch from Yamaha on the 87 it was different than the other years. They lump it in 87-95 but it was a one off piece.

Been working on building myself another Warrior for the past 2 years finally got the roller together. Still waiting on the shocks and need to finish the motor.

Check number 27 in the diagram. It has 2 needle bearings they can back out and bind up the transmission. You can just tap them back in with a bearing driver or a socket.

Dave I don`t know if you remember me I bought a motor from you a while back. I`m right in Piscataway and have a ton of Warrior parts if you need something message me.