blkblzr01

Congrats dude! :tup:







Chassis | Suspension | Controls

Frame: Stock
A Arms: +2 ASR MX Pro
Swingarm: Stock
Steering Stem: Stock
Stabilizer: N/A
Axle: G-Force +2+4
Carrier: Stock
Locknut: G-Force
Hubs F|R: Stock/Stock
Bars: Renthal 636
Throttle/Clutch Lever: Stock/Stock
Grips: Scott
Nerfs: Tusk Off-Road
Pegs: Stock
Bumper: DG
Grab Bar: Stock
Front Shocks: Works w/ remote rezzies
Rear Shock: Ohlin's Banshee
Brake Pads: Hellbound Racing
Brake Lines: SPEEDLINE'Z
Rotors F|R: Stock/Tusk Off Road
Rims F|R: Douglas Quad Rok 10x9/Douglas Quad Rok 9x8
Tires F|R: Dunlop

Body

Plastic: Front Race Cut
Graphics|Seat Cover: N/A
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: N/A
Fuel Tank: Stock
Skids plates: N/A
Lighting: Stock

Engine|Drive System

Cylinder Head: Port & Polished
Gaskets: Cometic
Piston: JE 10.50:1 85mm
Cam|Valves Springs: Stage 1 Hotcam .390/RD HD Valve Springs
Bore & Stroke: 85mm/ Stock
Displacement: 366cc
Carburetor: Stock
Spark plug: NGK
Stator: Stock
Shifter: YZ250
Air Filter|Box: UNI/CFM Aluminum
Header|Silencer: FMF Powerbomb/HMF Engineering
Clutch|Plates|Springs: EBC/Stock/Stock
Gearing F|R: Primary Drive 14/40
Chain: Primary Drive O-ring
CDI|Killswitch: Stock/N/A
Cooling: Permacool w/ tapped clutch cover
Other: Need to get case saver, swingarm skid, ac grab bar, and other odds and ends.

Congrats man!!

congrats!!

Congrats!!!

Congrats Blzr!

thx guys. it's been a slow process, but it's where i want it to be atm. it only needs a few cosmetic pieces, but you never know though i may decide to something else down the line.

Welcome to the big leagues.

is your pipe loud

beastlywarrior228 said:

is your pipe loud

Click to expand...

wasn't when i first put it on, but it's louder now after being broken in though. still sounds good as **** too.

still here and still clean.

Hey there blzr, I'm new to the warrior world. I just got a 2000 Yamaha Warrior 350. I am wondering where you got that radiator at and what you did to place it up on the frame. Get back to me as soon as possible please.

it's a 2 row transmission cooler from a auto parts store
a lot of us have this oil cooler mod works well

http://www.yfm350.com/forums/showthread.php?t=15037&highlight=clutch+cover