96 Warrior bearings help

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wardog76

Well-Known Member
Joined
Dec 14, 2010
Messages
97
Reaction score
0
hi guys i was just wondering how to grease the carrier or if i even need to i am having to put new bearings in that are sealed. My carrier has a zert on it but do i really need to fill it with grease? thanks for the help
 
alright thanks because im installing the bearings myself and wasnt sure about greaseing the carrier also before i took the axle out the sproket hub and rotor hub moved to the sides a little bit is that because the bearings are bad?
 
yupp, bad bearings, good to replace them. Grease that bitch up after you get it all back together. Be sure to get some on the middle of the axle itself too before you slide it in. The collar sits there and the grease you pump in has a harder time working its way in there.
 
thanks guys hopefully ill get those in in the next couple days and get back to riding
 
Back
Top