fuel air screw

shop deals on amazon
Advertise with us
Shop deals on ebay
Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
3

350rappy

Well-Known Member
Joined
Jun 27, 2005
Messages
270
Reaction score
0
Location
ft myers fl
I got a k&n with prodesign lid off and I bumped up jetting.... but im trying 2 fine tune the fuel air to make the absolute perfect mixture via spark plug yet that fuel air screw is very hard to get at I have 2 have a stubby screw driver and a merrior to adjust. is their any thing like the idle screw for the 350 raptor, for the fuel air screw that I could zip tie though the carb if you could get back 2 me that wold be also

thanks 350rappy
 
i bought a flexable shaft screwdriver from a dollar store-it looks like the biggest piece of crap you ever saw! but it works perfect. i figured out that the dyno jets are different sizes then the stock jets. i am runnind a dj132, dj needle clip 3 down and screw 3 turns out. its running strong-thanks again....
 
You must log in or register to reply here.

Latest posts

Back
Top