E excel88 Well-Known Member Joined Aug 19, 2005 Messages 52 Reaction score 0 Aug 24, 2005 #1 I see there are two bolts to adjust chain tension, but i find them SO hard to turn, do you also have to loosen the axle? if so how?
I see there are two bolts to adjust chain tension, but i find them SO hard to turn, do you also have to loosen the axle? if so how?
Y yfm350raptor Well-Known Member Joined Feb 27, 2005 Messages 150 Reaction score 0 Location Mohnton, Pa Aug 24, 2005 #2 Theres two bolts on each screw , one to loosen/ tighten the screw and one the hold it tight.
D DeathShadow Well-Known Member Joined Feb 27, 2005 Messages 2,766 Reaction score 1 Location NY - Orange County Aug 24, 2005 #3 u have to make the top and bottom bolts that run through the carrier and swingarm a little loose first...
u have to make the top and bottom bolts that run through the carrier and swingarm a little loose first...
0 05raptor350se Well-Known Member Joined Aug 20, 2005 Messages 118 Reaction score 0 Location Pittsburgh PA Aug 24, 2005 #4 it explains it very well in the manual... if u have one
