How to get the carb off??

Hey guys, is their a thread anywheres or anything like that on how to take the carb off the 350 rappy.??

If the intakes anything like the warrior other than the fact that the carb is diff just take the airbox off by taking the 2 bolts out then take the boot off the carb with the screw then just unbolt your carb from the intake and disconect any cables/hoses and you should have it

Just pull off the fuel line and undo the hose clamps on the air hose and remove the mounting bolts to the manifold and carburetor then rip the bitch right out - no need to take the airbox off or anything like that. As far as the throttle cable you can just remove it from the carb (undo the cover where the cable goes in and remove the end from the little hole in the throttle arm) or you can do the same thing to the throttle housing if you don’t want to mess with the carb in that area (housing can be a little easier).