baja226sport
Well-Known Member
- Joined
- Nov 10, 2006
- Messages
- 406
- Reaction score
- 0
Well, I hate to see it go. I am particularly fond of this bike and have taken excellent care of it but I am starting to get crowded so something has to go.
It is a 1987 but is cleaner than most 2004's I've seen.
350cc 4 stroke, electric start and reverse (pull start back up)
Re-ringed and valve job but still stock bore. Runs awesome!!!
So here is a quick run down:
Bike has a blue powder coated frame with silver swing and a arms.
Has 2004 front hood for updated look
55watt halogen lights have been added
New battery
New O-ring chain
New front sprocket
billet sprocket cover with case saver
Billet frame guards
PRM a-arm skids
PRM engine skid
UM Racing swing arm skid
DG alloy nerf bars
DG alloy bumper
PRM grab bar
New handle bars
Billet bar clamp
New grips
Billet gas cap
Some polished parts from mod quad (rear resevoir cover, dip stick, maybe more)
Carb is jetted
Has Pro-Circuit t4 pipe
stage 1 hot cam
Noss machine billet bolt on kit with K+N filter with outer wear
K+N Crank case breather
Shockwears
Brand new front rims .190 douglas with maxxis front pro tires
Brand new rear rims .190 douglas with maxxis all trak tires
All bearings and bushings are good
Most likely more that I am forgetting!
No cracks in the plastic or rips in the seat. Have clean Pa title. Again, this thing runs awesome and is really clean!
I'd like to get $1800.00 for it. I have way more than that into it but it would kill me to part it out! The new rims and tires with 1 ride on them were over $400.00 alone!
Well, I hate to see it go. I am particularly fond of this bike and have taken excellent care of it but I am starting to get crowded so something has to go.
It is a 1987 but is cleaner than most 2004's I've seen.
350cc 4 stroke, electric start and reverse (pull start back up)
Re-ringed and valve job but still stock bore. Runs awesome!!!
So here is a quick run down:
Bike has a blue powder coated frame with silver swing and a arms.
Has 2004 front hood for updated look
55watt halogen lights have been added
New battery
New O-ring chain
New front sprocket
billet sprocket cover with case saver
Billet frame guards
PRM a-arm skids
PRM engine skid
UM Racing swing arm skid
DG alloy nerf bars
DG alloy bumper
PRM grab bar
New handle bars
Billet bar clamp
New grips
Billet gas cap
Some polished parts from mod quad (rear resevoir cover, dip stick, maybe more)
Carb is jetted
Has Pro-Circuit t4 pipe
stage 1 hot cam
Noss machine billet bolt on kit with K+N filter with outer wear
K+N Crank case breather
Shockwears
Brand new front rims .190 douglas with maxxis front pro tires
Brand new rear rims .190 douglas with maxxis all trak tires
All bearings and bushings are good
Most likely more that I am forgetting!
No cracks in the plastic or rips in the seat. Have clean Pa title. Again, this thing runs awesome and is really clean!
I'd like to get $1800.00 for it. I have way more than that into it but it would kill me to part it out! The new rims and tires with 1 ride on them were over $400.00 alone!
It is a 1987 but is cleaner than most 2004's I've seen.
350cc 4 stroke, electric start and reverse (pull start back up)
Re-ringed and valve job but still stock bore. Runs awesome!!!
So here is a quick run down:
Bike has a blue powder coated frame with silver swing and a arms.
Has 2004 front hood for updated look
55watt halogen lights have been added
New battery
New O-ring chain
New front sprocket
billet sprocket cover with case saver
Billet frame guards
PRM a-arm skids
PRM engine skid
UM Racing swing arm skid
DG alloy nerf bars
DG alloy bumper
PRM grab bar
New handle bars
Billet bar clamp
New grips
Billet gas cap
Some polished parts from mod quad (rear resevoir cover, dip stick, maybe more)
Carb is jetted
Has Pro-Circuit t4 pipe
stage 1 hot cam
Noss machine billet bolt on kit with K+N filter with outer wear
K+N Crank case breather
Shockwears
Brand new front rims .190 douglas with maxxis front pro tires
Brand new rear rims .190 douglas with maxxis all trak tires
All bearings and bushings are good
Most likely more that I am forgetting!
No cracks in the plastic or rips in the seat. Have clean Pa title. Again, this thing runs awesome and is really clean!
I'd like to get $1800.00 for it. I have way more than that into it but it would kill me to part it out! The new rims and tires with 1 ride on them were over $400.00 alone!
Well, I hate to see it go. I am particularly fond of this bike and have taken excellent care of it but I am starting to get crowded so something has to go.
It is a 1987 but is cleaner than most 2004's I've seen.
350cc 4 stroke, electric start and reverse (pull start back up)
Re-ringed and valve job but still stock bore. Runs awesome!!!
So here is a quick run down:
Bike has a blue powder coated frame with silver swing and a arms.
Has 2004 front hood for updated look
55watt halogen lights have been added
New battery
New O-ring chain
New front sprocket
billet sprocket cover with case saver
Billet frame guards
PRM a-arm skids
PRM engine skid
UM Racing swing arm skid
DG alloy nerf bars
DG alloy bumper
PRM grab bar
New handle bars
Billet bar clamp
New grips
Billet gas cap
Some polished parts from mod quad (rear resevoir cover, dip stick, maybe more)
Carb is jetted
Has Pro-Circuit t4 pipe
stage 1 hot cam
Noss machine billet bolt on kit with K+N filter with outer wear
K+N Crank case breather
Shockwears
Brand new front rims .190 douglas with maxxis front pro tires
Brand new rear rims .190 douglas with maxxis all trak tires
All bearings and bushings are good
Most likely more that I am forgetting!
No cracks in the plastic or rips in the seat. Have clean Pa title. Again, this thing runs awesome and is really clean!
I'd like to get $1800.00 for it. I have way more than that into it but it would kill me to part it out! The new rims and tires with 1 ride on them were over $400.00 alone!
