*Intake*

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DeathShadow

Well-Known Member
Joined
Feb 27, 2005
Messages
2,766
Reaction score
1
Location
NY - Orange County
intake.jpg


Mmmmmm....
 
Looks good where did you get filter from, I have my crankcase hose running into same spot but would like the filter on end
 
I used:

1. K&N Case Filter $21.00 - KNN-62-1330
2. 1/2" black ABS elbow from auto parts store - $3.00
3. 1/2" diameter thick fuel line for hose to prevent kinking - $1.50
4. Two small hose clamps - $1.00

One thing I will say when drilling the hole for the elbow make SURE you are accurate and drill it perfect; if you drill to much to one side even by the most slight bit the filter wont sit straight.
 
Drill up the airbox so it'll breathe a little better on the top end, and go ride a little more, it's too clean right now! ;D
 
OK my cheap ass version lol
Filter from a O'riellys $9.99
Came with a hose clamp
Took a drimmel to stock hose elbow fits perfect lol
Added 1more hose clamp 45cents
 
You need the two K&Ns (big one and small vent one) to be a
"super" cool guy - what are you thinking man!!? :cool:. Not to mention that shiney end of the breather filter engraved with "K&N" adds like 10HP atleast.... ;D
 
I would agree, the shiney 'boo' gave me 10 hp also!!! ;D What about two UNI filters, would that make me the antichrist? ;D
 
Nope just gotta keep it in the family or you risk shunning yourself down to just a "cool guy". A UNI and a UNI or a K&N and a K&N and you are def. cooler then all the rest ;).
 
Back
Top